ECS A31G Series, Руководство пользователя

Страница: 32 / 39

27
Chapter 3: BIOS Setup Utility
LAN/Ring Power On
The system can be turned off with a software command. If you enable this item,
the system can automatically resume if there is an incoming call on the Modem.
You must use an ATX power supply in order to use this feature.
Resume From USB Device
If you enable this item, the system can automatically resume by using the USB
device.
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the PCI bus and
those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
PCI / Plug and Play Setup
Dual Monitor Support Disabled
Primary Graphics Adapter PCI
Allocate IRQ to PCI VGA Yes
PCI IDE BusMaster Disabled
Help Item
Option
Disabled
Enabled
Dual Monitor Support
This item is a switch to turn on/off the Dual Monitor function. If it is enabled,
please connect the system to two monitors for performing the Dual Monitor
function; if disabled, this function will be turned off.
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI or the AGP bus.
The default PCI setting still lets the onboard display work and allows the use of
a second display card installed in an AGP slot.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
F9: Optimized Defaults