ECS 945GCD-CI, Руководство пользователя

Страница: 36 / 50

30
Using BIOS
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item
SATA Configuration IDE
Onboard SATA Mode
Enhanced
Onboard AUDIO Function Enabled
Serial Port1 Address 3F8/IRQ4
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
USB Functions
Enabled
USB 2.0 Controller Enabled
Legacy USB Support
Enabled
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
DVMT Mode Select (DVMT Mode)
DVMT is Dynamic Video Memory Technology. This item helps you select video
mode.
DVMT/FIXED Memory (Maximum DVMT)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory. When set to DVMT Mode, the graphics chip
will dynamically allocate system memory as graphics memory, according to system
and graphics requirements.
Share Memory Size (8MB)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
Memory Hole (Disabled)
This item allows users to enable or disable memory hole remapping.
Options
IDE
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration.
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
Onbord AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio controller.