ECS 915-M5GL Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 50

ECS 915-M5GL Скачать руководство пользователя страница 42

38

Using BIOS

Press <Esc> to return to the main menu setting page.

USB Function (Enabled)

This item allows you to enable or disable USB function.

Legacy USB Support (Enabled)

This item allows you to enable or disable Legacy USB support.

USB 2.0 Controller (Enabled)

This item allows you to enable or disable USB 2.0 Controller.

AUDIO Device (Enabled)

Enables and disables the Audio device.

LAN Device (Enabled)

Enables and disables the onboard LAN.

LAN Boot ROM Support (Disabled)

This item allows you to enable or disable the onboard LAN Boot ROM function.

Suspend mode (S3)

After the selected period of system inactivity, all devices expect the CPU shut off.

APM Power Management (Enabled)

Use this item to enable or disable a power management scheme. If you enable power
management, you can use the items below to set the power management operation.
Only APM is supported.

Repost Video on S3 Resume (No)

If STR mode or Auto mode is selected, this item allows you to enable/disable this function.

Suspend Time Out (Disabled)

This sets the timeout for Suspend mode in minutes. If the time selected passes without any
system activity, the computer will enter power-saving Suspend mode.

Power Mangement Setup

This page sets up some parameters for system power management operation.

F9: Optimized Defaults

F8:Fail-Safe Defaults

F7:Previous Values

: Move

F10: Save

F1: General help

+/-/: Value

Enter : Select

ESC: Exit

Select the ACPI state used
for System Suspend.

Help Item

CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.

Power Management Features

Suspend mode

[S3]

APM Power Management

[Enabled]

Repost Video on S3 Resume

[No]

Suspend Time Out

[Disbaled]

Power Button Mode

[On/Off]

Restore on AC Power Loss

[Power Off]

PS/2 Keyboard Wakeup

[Disabled]

PS/2 Mouse Wakeup

[Disabled]

Resume On Ring

[Disabled]

Resume On LAN

[Disabled]

Resume On PME#

[Enabled]

USB Device Wakeup From S3

[Disabled]

Resume On RTC Alarm

[Disabled]

«
...
40
41
42
43
44
...
»

Содержание 915-M5GL



















































Отзывы:

Нет отзывов