ECS 662/1066T-M2, Руководство пользователя, Страница: 39 / 57

33
Using BIOS
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode (ECP)
Use this item to set the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port),
or EPP & ECP.
ECP Mode DMA Channel (DMA3)
Use this item to assign the DMA Channel under ECP Mode function.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
Press <Esc> to return to the main menu page.
Item Help
mnlk
Power Management Setup
This option lets you control system power management. The system has various power-
saving modes including powering down the hard disk, turning off the video, suspending to
RAM, and software power down that allows the system to be automatically resumed by
certain events.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
ACPI Enhanced Efficiency Disabled
Soft-off by PWR-BTTN
Delay 4 Sec
PWRON After PWR-Fail Power Off
Resume on LAN
Disabled
Wake-Up by PME Enabled
Power On by Ring Disabled
Resume on RTC Alarm Disabled
Disabled
Enabled
Options
Soft-off by PWR-BTTN (Delay 4 Sec)
If the item is set to Instant-Off, then the power button causes a software power down. If
the item is set to Delay 4 Sec. then you have to hold the power button down for four
seconds to cause a software power down.
ACPI Enhanced Efficiency (Disabled)
This item allows you to enable or disable ACPI Enhanced Efficiency function.
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its last operating
status.