ECS 649-M2, Руководство пользователя

Страница: 66 / 98

60
SiS965/SiS965L SATA RAID Setup Guide
8 Press <Q> again to exit this BIOS utility and the red message frame will show
as the same as the creation of the RAID 0 array. Press <Y> and <Enter> to
save changes.
9 Once the array has been created, you will need to FDISK and format the array
as if it were a new single hard drive.
Creating a RAID 0+1 (Stripe-Mirror) Array
To create an a Stripe-Mirror array, follow these steps:
1 Press <A> to start creating a RAID array.
2 Press <4> and <Enter> to select RAID 0+1.
3 After step 2, RAID 0+1 array will be shown on the top of the main frame.
4 Press <Q> until exit this BIOS utility RAUID Setup menu and the red message
frame will show as the same as the creation of the RAID 0 array. Press <Y>
and <Enter> to save changes.
• Only SiS965 controller can support RAID 0+1 function
• The selection of RAID 0+1 will appear when 4 single HDD existing.
• For user’s convenience, RAID 0+1 will be auto created.
• For best performance, the sequence of RAID 0+1 is forced to set as Disk1->
Disk 3-> Disk 2-> Disk 4.