ECRON TF-2000-AR, Руководство пользователя

Страница: 39 / 46

39
EN
BATTERY FITTING INSTRUCTIONS
· Remove the battery compartment cover located in the rear
part of the remote control.
· Each remote handset uses 2xAAA batteries. Fit the batter-
ies in the correct polarities (+/-) as indicated inside the com-
partment.
· Close the compartment cover again.
· The batteries should not be exposed to excessive heat such
as sunlight, fire, etc.
· Incorrect use of the batteries may result in an electrolyte
leakage that will have a corrosive effect on the compartment.
· Do not mix different types of batteries. For example, alkaline
batteries and rechargeable batteries.
· Do not mix old batteries with new ones.
· If the unit is not to be used for a long period of time,
remove the batteries from the compartment.
1
．
All the function of this fan can be controlled from the
“soft-touch button on the unit’s control panel” or “the wireless
remote control”.
a. Turn on/off the fan
Press this button to turn on the fan. Press it again to turn the
fan off.
b. Speed function L M H
Each time you press the “Speed “ button the speed will
cycle between the “L M H”.
“L” ----- Low
“M” ----- Medium
“H” ----- High
c. Oscillating functio
To oscillate fan, press the “Oscillation” button .
Press second time to stop the oscillation.
d. Timer function
Setting the timer at desired time intervals. This fan has
8-hour timer – 1 hr, 2 hr, 4 hr & 8 hr.
Just simply press “Timer” button .
- press once, timer is set to 1hr;
- press twice, timer is set to 2hrs;
- press 3 times, timer is set to 4hrs;
- press 4 times, timer is set to 8 hrs;
- press 5 times, timer function is off.
e. M1/ M2 function
M1 refer to natural wind function while M2 refer to sleeping
wind function.
Press M1, this will automatically vary the fan speeds faster
and slower random.
Press M2, this will activate the sleep wind mode.
The wind speeds will be lowered cyclically in every 30 min-
utes until it reaches low speed level .