ECRON RD40 AC, Руководство пользователя

Страница: 36 / 40

36
When using electrical devices, it is important to follow
these basic safety rules to reduce the risk of fire, electric
shock and injuries:
· Before using the device, ensure that the supply voltage
for your device corresponds to your electrical installation.
· Do not plug the fan into the electrical network until it is
fully assembled.
· The fan must be set on a horizontal and stable surface
when it is switched on, to prevent it from being
knocked over.
· The fan must not be set in a humid place, or in a place
where humidity is likely to be high (such as in a bathroom).
· Do not set the fan on or near a window. Rain could
create an electrical danger.
· The device should not be exposed to splashes or
water drops.
· This device has been designed specifically for
domestic use.
· This device is for indoor use. Do not use outdoors.
· Do not use this device with an extension lead.
· Do not use this device near fire.
· To keep risks of fire and electrocution to a minimum,
do not use the fan together with a speed control device,
frequency converter or electric programmer.
· Do not touch the fan with wet hands.
· Do not spray insecticides or liquids inside the
fan grille.
· For safety reasons, never leave the device unattended
while it is in operation.
· Never insert your fingers, pens or any other objects into
the grille while the fan is in operation.
· Ensure that the device is switched off and unplugged
from the mains when it is not in use, as well as before
moving it, setting it somewhere else or cleaning it.
· Ensure that the fan is unplugged from the mains
before removing the protective grille.
· To disconnect the device from the mains, do not pull
on the connection cable; always pull it out by the plug.
· This apparatus can be used by children aged 8 and
older, as well as persons with reduced physical, sensory
or mental capacities, or who lack experience and
knowledge, as long as they are supervised or have
received appropriate instruction on how to use the
apparatus safely, and if they understand the dangers
inherent to it. Children must not play with the
apparatus. Cleaning and maintenance normally carried
out by the user must not be performed by children
without supervision.
· Do not use the fan if the supply cable or plug
are damaged.
· If the supply cable becomes damaged, it must be
replaced by the manufacturer, an authorised technical
service or similarly-qualified personnel. Do not try to
repair it yourself. That way, you will prevent
unnecessary risks.
Control panel and remote control
A. On LED
B. Swing LED
C. Speed LEDs
(high-medium-low)
D. OFF button
E. TIMER button
F. ON/SPEED button
G. Swing button
H. Timer LED (0.5-1-2-4 hours)
1. Plug the fan into an appropriate
power supply. The LED (A) will
light up.
2. Switch on the fan by pressing
the ON/SPEED button (F) on the
control panel. The fan will start to
operate at low speed. The low
speed LED (C) will light up.
3. To change the speed, press the
button (F) several times. The
speed will change with every press
and the corresponding LED will
light up.
4. To activate swing, press the
SWING button (G). The swing LED
(B) will light up and the fan will
start to swing horizontally. To stop
the swing, press the button
(G) again.
5. The fan has a timer. After
switching on the fan, press the
TIMER button (E) and the fan will
start to operate for the time
selected: press the TIMER button
several times. The time changes
with each press and the
corresponding LEDs (H) will light
up. When the programmed time
has elapsed, the fan will switch off
automatically. The timer can be
programmed from 0.5 to 7.5
hours. In this setting, all of the
time LEDs are lit up.
6. The air flow can be adjusted by
moving the fan upwards or
downwards. Loosen the neck
screw (9) and adjust the motor to
the desired vertical position.
Tighten the screw again to fix it
in position.