Page.85.
change the fuse, Pls opens the battery cover to change.
Note:
10A socket without fuse protection, if over the current range
Wrong using the 10A socket to measure the voltage, will damage the meter.
3.3.30 Optical power meter ( *Optional )
Click icon to enter ,with five wavelength 1625nm,1550nm, 1490nm, 1310nm,1300nm, 850nm,
linear or nonlinear optical power display, both for optical power testing and Fiber link loss relative
measurement. It is necessary tool for installation and maintenance optical fiber communication, cable
television and CCTV security system.
Note
: Please keep the fiber connector and the dust cap be clean, and clean the detector with the special
alcohol.
Data hold
While testing, click "Hold" to data hold, the data will not change. It's convenient to read. Press
again to quit.
Relative power value (optical link loss) measurement
While testing, set the wavelength for measurement. Click "relative"(difference) to test, the tester Auto
save current fiber power value as the base reference value. Input another optical fiber to be measured,
Schmidt and Muller Telecommunications Pty Ltd trading as ELECTROCRAFT AUSTRALIA - ABN 79 067 000 426
