Page.9.
2) If use the tester's menu to turn off the tester's PoE power supply,
the PoE switch and the power
sourcing equipment are allowed to connect to the tester's PSE port,
and the PoE power will be supplied
to the IP camera by the tester's LAN port. On this condition,
the tester cannot receive data from IP
camera,
but the computer connected to the PoE switch can receive the data via the the tester.
Warning:
PoE
switch or PSE power sourcing equipment only can be connected to tester "PSE IN
"
port,
otherwise
will
damage
the
tester.
3.2.2 Analog camera connection
1)
Connect
the
camera's
video
output
to
the
IP
tester's
VIDEO
IN.
The
image
will
display
pushing
2)
CCTV
IP
Tester
"VIDEO
OUT"
interface
connect
to
the
Video
input
of
monitor
and
optical
video
transmitter
and
receiver,
the
image
display
on
the
tester
and
monitor.
3)
Connect
the
camera
or
the
speed
dome
RS485
controller
cable
to
the
tester
RS485
interface.(Note:
positive
and
negative
connection
of
the
cable)
Schmidt and Muller Telecommunications Pty Ltd trading as ELECTROCRAFT AUSTRALIA - ABN 79 067 000 426
