Install the Right Side Panel
5
6
7
8
Slide the Center Back Panels into Place
Slide the Outer Back Panels into Place
Install the
Right Side Panel (A2)
onto the
Top Panel (B)
and
Bottom Shelf (C)
with eight
Hex Screws (I)
using the Hex Tool.
Slide the remaining
Back Panels (H)
into the grooves on the
Top Panel (B)
and
Bottom Shelf (C)
as shown, until fully seated into the groove on the inside of the
Grooved Dividers (F)
.
Tip:
If the
Back Panels (H)
do not slide in easily, wiggle the panels while pushing into place.
Slide two
Back Panels (H)
into the grooves on the
Grooved Dividers (F)
as shown, until fully
seated into the groove on the underside of the
Top Panel (B)
.
Tip:
If the
Back Panels (H)
do not slide in easily, wiggle the panels while pushing into place.
See Next Page
Install the Bottom Shelf
Insert the pre-installed wooden dowels on
Hanger Hook Dividers (G)
into the corresponding
holes on the topside of
Bottom Shelf (C).
Install the
Bottom Shelf (C)
onto the
Grooved Dividers (F)
with six
Hex Screws (I)
using
the Hex Tool.
