1
2
Install Shelves to the Dividers
3
Connect Lower Shelf to Lower DIviders
4
Install Bottom Shelf to Dividers
Connect Top Panel to Upper Dividers
Install four
Cam Posts (J1)
into the threaded plastic inserts on the underside of
Top
Panel (B
) with a Phillips screwdriver.
Reminder:
Do not overtighten, as the plastic threads can be stripped.
Insert the
Top Panel (B
) Cam Posts into the holes on the top edge of the
Left & Right
Dividers (F)
.
Turn the
Cam Locks (J2)
clockwise with a Phillips screwdriver to lock the
Left & Right
Dividers (F)
onto the posts.
Align the slits on the
Left and RIght Dividers (F)
with the slits on
Middle Shelves (D
) as
shown and slide together until seated.
Place three
Cam Locks (J2)
into the recessed holes on the
Anchor Bar (C).
Install three
Cam Posts (J1)
into the threaded plastic inserts on the underside of
Top Panel (B
)
with a Phillips screwdriver.
Reminder:
Do not overtighten, as the plastic threads can be stripped.
Insert the
Top Shelf (B
) Cam Posts into the holes on the top edge of the
Anchor Bar (C)
.
Turn the
Cam Locks (J2)
clockwise with a Phillips screwdriver to lock the
Anchor Bar (C)
onto
the posts.
C
a
r
e
fu
l
ly
R
otat
e U
p
ri
gh
t
See Next Page
Place two
Cam Locks (J2)
into the recessed holes on
the
Left & Right Dividers
(F)
, with the arrow facing the
closest edge.
Install the
Bottom Shelf (E)
on to the
Left and Right Dividers (F
) with four
Hex Screws (I)
using the Hex Tool.
Two Adults Recommended:
Carefully rotate unit upright.
Note:
Each divider
side with six holes
should face outward.
Tip:
Groove for back panels should align with shelves.