5
Insert Upper Back Panels
Connect the Top Panel to Upper Dividers
6
7
Insert the Left Upper Back Panel
Install the Left Side Panel
8
See Next Page
Install eight
Cam
Posts (K1)
into
the threaded plastic inserts on
the underside of
Top Panel (B)
with a Phillips screwdriver.
Reminder:
Do not overtighten,
as the plastic threads can be
stripped.
Insert the
Top Panel (B)
Cam
Posts into the holes on the top
edge of the
Upper Dividers (F)
.
Turn the Cam Locks clockwise
with a Phillips screwdriver to lock
the
Upper Dividers (F)
onto the
posts.
Install the
Left Side Panel (A1)
to the
Top Panel (B), Upper Shelf (C
),
Lower Shelf (D)
and
Bottom Shelf (E)
with eight
Hex Screws (J)
using the Hex Tool.
Slide three
Upper Back Panels (G)
into the grooves on the
Upper
Dividers (F)
as shown, until fully
seated into the groove on the
topside of the
Lower Shelf (D
).
Tip:
If the Back Panels do not slide
in easily, wiggle the panels while
pushing into place.
Place two
Cam Locks (K2)
into the
recessed holes on each
Upper
Dividers (F)
, with the arrow facing
the closest edge.
Slide an
Upper Back Panel (G)
into the grooves on the
Top Panel (B)
and
Lower Shelf (D
)
as
shown, until fully seated into the groove on the side of the
Upper Divider (F)
.
Tip:
If the Back Panels do not slide in easily,
wiggle the panels while pushing into place.
