FCC STATEMENT:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference
that may cause undesired operation.
WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
reorient or relocate the receiving antenna, increase the separation between the equipment
and receiver, connect the equipment into an outlet on a circuit different from that to which
the receiver is connected, consult the dealer or an experienced radio/TV technician for help.
RF WARNING STATEMENT:
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and
operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1)
This device may not cause interference, and
2)
This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Pour maintenir la conformité avec les directives d'exposition RF de la FCC, cet
équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le
radiateur et votre corps : Utilisez uniquement l'antenne fournie.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended.
The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land
or water environments. The speaker has been tested to IP67 waterproofing standards, which
means the speaker can be submerged in up to 3 feet of water for 30 minutes without any
damage. However, the speaker is
NOT
intended for constant underwater use.
Always make sure the cap(s) / covers(s) are clean, free from sand or debris, and correctly
fitted. The speaker will only meet IP67 ratings if all rubber seals, gasket(s), and cover(s) /
cap(s) are in place. If you notice a muffling of audio after submersion, gently shake the unit
to clear excess water. If your speaker is exposed to salt water, clean it thoroughly after use
with fresh water.
The USB cables, power adapters, and unit with an improperly fitted cap are
NOT
waterproof.
To prevent fire or shock, do
NOT
attempt to charge this unit if it is wet or you suspect
water has entered the unit. In this situation, please return the unit to Grace Digital for a free
assessment. If we have found that the unit has carried water, we will repair or replace the unit
free of charge.
Charge Your VX Footwell Speakers
Prior to First Use
For best performance, fully charge your VX Footwell
speakers before you turn it on for the first time. Connect
the USB-C port to the USB cable and a 5V power source.
Approximately 12 hours of charging is required from a low
to a full charge.
Power source options include the USB connection to
your computer or a power outlet using a 5V, 2A USB to
AC power adapter. It is recommended to always use the
USB cable and power adapter included with your VX
Footwell speakers.
Bluetooth Pairing & Your Audio
Connecting
With Bluetooth: Connect Your Smart Device
to One of the VX Footwell Speakers & Play Audio
Turn on one of the two VX Footwell speakers, hereafter
referred to as
Speaker A
. The backlit Bluetooth Button
will
FLASH BLUE
, indicating that it is ready to pair.
Turn on Bluetooth on your Bluetooth device (Smart
Device) and set the device in pairing mode. Available
Bluetooth connections shall appear. Select
‘FW-ECOXGEAR’ speaker from the list of discovered
devices on your Bluetooth device. Wait for a few seconds
until the connection is completed.
NOTE:
Bluetooth connection feature is found in the
Settings section of most mobile phones and other
Bluetooth enabled devices.
When the FW-ECOXGEAR selection is made and the
Bluetooth connection is completed, your VX Footwell
speaker will announce: “Your phone is connected.” The
LED Bluetooth Button backlight will shine
SOLID BLUE
.
Set Up Recommendations 1-2-3
1
2
