EcoxGear ECOXBT GDI-EGBT500-510, Руководство пользователя

Страница: 6 / 7

FCC COMPLIANCE STATEMENT & WARNING:
This device has been tested & found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
The device generates, uses & can radiate radio frequency energy & if not installed
& used in accordance with instructions may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a particular
installation. If this device causes interference to radio or television reception try one
of these measures: reorient or relocate the receiving antenna, increase separation
between device & receiver, connect the device into an outlet on a circuit different
from that to which the receiver is connected, consult a dealer or experienced radio /
TV technician for assistance. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the device
and/or void the manufacturer’s limited warranty.
PRODUCT USE AND PROTECTION:
Read and Follow all Instructions. Use only as intended.
The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and
in land or water environments. The speaker has been tested to IP67 waterproofing
standards which means the speaker can be submerged in up to 3 feet of water for
30 minutes without any damage. However, the speaker is not intended for constant
underwater use.
Always make sure the cap(s) / covers(s) are clean, free from sand or debris and
correctly fitted. The speaker will only meet IP67 ratings if all rubber seals, gasket(s)
and cover(s) / cap(s) are in place. If you notice a muffling of audio after submersion
gently shake the unit to clear excess water. If your speaker is exposed to salt water
clean it thoroughly after use with fresh water.
The USB cables, power adapters, and unit with an improperly fitted cap, are
NOT waterproof.
To prevent fire or shock, do not attempt to charge this unit if it is wet or you suspect
water has entered the unit. In this situation, please return the unit to Grace Digital for
a free assessment. If we have found that the unit has carried water we will repair or
replace the unit free of charge.
SAFETY ADVISORY & WARNING:
Read and Follow all Instructions. Use only as intended.
CAUTION:
CAUTION:
WARNING:
WARNING:
WARNING:
ATTENTION:
ATTENTION:
Do NOT open to repair. A qualified technician must carry out repair work.
ATTENTION: Do NOT charge while the unit is wet. Towel dry the
unit AND make sure all connections are dry BEFORE plugging in the
charging connector. Failure to do so may result in electrical damage to
the unit and may void the warranty.
This product may contain chemicals listed in Proposition 65
(www.oehha.ca.gov/prop65/prop65_list/Newlist.html)
EcoXBT has a built-in Lithium Ion battery. The battery must
NOT
be
used in or near an open heat source or excessive heat.
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
Do NOT dispose of in a landfill. Contact Grace Digital at
www.gracesupport.com or a certified recycling agent to dispose of the unit.
AC adapter is a device forming a part of the main plug therefore the AC
adapter can always be readily disconnected from AC socket-outlet.
SAFETY
This product has a limited life span of use and should be replaced when it shows
obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so could
cause damage to the unit allowing water to ingress. A unit with water ingress should
not be charged due to potential risk of fire or shock.
Do not attempt to mount the unit except with the approved ECOXGEAR mounts.
Doing so could cause damage to the unit allowing water to ingress. A unit with water
ingress should not be charged due to potential risk of fire or shock.
Please exercise care and good judgment when using your ECOXGEAR speaker. Audio
levels should be appropriate to your environment, comply with all local regulations,
and always ensure that you can hear and be aware of any potential hazards around you.
You should always
1) Use the ECOXGEAR speaker in accordance with any music or noise rules
and regulations.
2) Use the proper ECOXGEAR mounts if you intend to mount the unit.
3) Properly seal the ECOXGEAR prior and after each use when in humid or water
environments to avoid water damage to the internal components. Salt water / air
is particularly corrosive. Always make sure that the gaskets are sealed when in salt
water environment and the unit properly rinsed off after use.
4) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt or water
on them prior to storage or removing the back cover.
5) Store your unit with all caps properly sealed to avoid long term internal moisture
damage inside your unit.
6) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
7) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit
or if the unit has experienced a severe impact that may have affected the
integrity of the unit to take on water.
You should never
1) Charge your ECOXGEAR if you suspect water has entered the device. Charging a
device with water inside could be potentially hazardous and cause fire or a spark.
2) Use your ECOXGEAR if you have dropped it or thrown it against a hard surface
which may have destroyed the integrity of the speakers, housings or gaskets. In
the event of a severe impact to your unit please return the unit to Grace Digital to
review for potential damage.
3) Open the auxiliary door in a water environment. This could cause water to ingress
into the unit which could potentially be hazardous and cause a fire or a spark.
4) Connect a device to the auxiliary input jack when in a water environment. The
auxiliary jack should only be used in a dry environment.
5) Attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital
for any assessments and repairs.