Quick Start USER GUIDE
ON OFF
MASTER
POWER
MASTER POWER
ECOSTONE has a separate Master Power Switch and a Standby Button.
The Switch MUST be set to the
ON
position to power your ECOSTONE.
Once the Switch is set to ON, use the Standby Button located on the top panel to turn the unit
ON/OFF
NOTE:
When not in use for extended periods, turn the MASTER POWER OFF to preserve battery life.
IMPORTANT:
STANDBY POWER function will NOT operate when the MASTER POWER is set OFF
OUTPUT
5V 1A
USB OUTPUT
Connect your devices’ USB cable to connect to the USB OUTPUT (5V…1A) connection
in order to charge your device. Connect to the USB OUTPUT port to charge your personal device. Use
the USB cable included with your personal device.
NOTE:
Charging rates are similar to the charging rate when connected to the USB of a desktop PC.
Typical charge time is approx. 3hrs from low to full for most Smartphones however charge times will
vary depending on the device being charged
, the device’s battery specs., and the device features.
In some instances your personal device may not indicated charge is in process
CAUTION:
Do NOT charge if unit and/or connections are wet or damp
INPUT
5V 1A
USB INPUT
Connect your ECOSTONE to the USB micro INPUT using the USB cable to charge your
ECOSTONE
RECOMMENDATION:
Use the USB cable included with the ECOSTONE.
NOTE:
Typical charge time from low to full charge is up to approx. 5 hours.
NOTE:
ECOSTONE can charge while playing audio. ECOSTONE can charge your device while
playing audio. Battery playtime shall be reduced depending on the time and size of the device charging
while connected to your ECOSTONE.
CAUTION:
Do NOT charge if unit and/or connections are wet or damp
AUDIO
AUX IN
AUDIO AUX IN
Connect an audio device using the 3.5mm cable connection on the AUDIO AUX IN as
an alternative to a Bluetooth connection to your ECOSTONE.
NOTE:
Volume level must be controlled from the audio device when connected to AUX IN connection.
BACK PANEL
[under the Cap] Master Power Switch & Connection Functions
