14
Figure 10: Battery installation for Multi-channel sensor
2.
BEFORE
inserting the batteries, locate the dip switches on the inside
cover of the lid of the transmitter.
3.
Channel Number:
This item supports up to eight transmitters. To set
each channel number (the default is Channel 1), change Dip Switches
1, 2 and 3, as referenced in Figure 11.
4.
Temperature Units of Measure:
To change the transmitter display
units of measure (°F vs. °C), change Dip Switch 4, as referenced in
Figure 11.
Switch in down position.
Switch in up position.
Figure 11: Dip Switch diagram
