Instruction Manual
7
3.
Insert one AA battery.
4.
After inserting the battery, the remote sensor
LED indicator will light for 4 seconds, and
then flash once per 60 seconds thereafter.
Each time it flashes, the sensor is
transmitting data.
5.
Close the battery door.
6.
Repeat for the additional remote sensor,
verifying each remote is on a different
channel.
2.4 Display Console Set Up
1.
Move the remote thermometer(s) about 2
to 3m away from the display console (if the
sensor is too close, it may not be received
by the display console).
2.
Remove the battery door on the back of
the display, as shown in Figure 2. Insert
one AA (alkaline, lithium or rechargeable)
