15
When the gateway has configured to wifi
successfully, take the WN32/WN32
(STH35 probe) sensor close to the
gateway(keep 5ft away from each other)
and insert batteries into the WN32/WN32
(STH35 probe) sensor. Wait for 1-2
minutes, the sensor data will display on
the Live Data page of the app then.
6.1 Replacing an existing sensor
unit
If this sensor is a replacement for a
previous unit, ensure the previous unit is
powered down and follow the steps below:
1.Insert the batteries to power up the new
sensor unit.
2.Open the WS View Plus/ Ecowitt APP–
select Device List on Menu – select
your device to enter Live Data page-
Click More button – select Sensor ID.
