ECOWITT HP1000SE PRO Скачать руководство пользователя страница 93

Страница: 93 / 95

Gerneral safety insructions

Danger of asphyxiation:

Keep all packaging materials (plastic bags, rubber bands, etc.) away from children.

There is a danger of suffocation!

Danger of burns:

Caution! Leaking / leaking battery acid can lead to burns! Avoid contact of battery

acid with eyes, mucous membranes and skin. In case of contact, rinse the affected

areas immediately with clear water and consult a doctor.

Risk of electric shock:

Children must not be unattended with the device, because the device contains

electronic parts which are operated by means of a power source. The device may

only be used as described in the instructions. If not, there is a risk of electric shock.

Danger of fire & explosion:

Use only recommended batteries. Never short-circuit the unit or batteries. Never

throw the device or batteries into a fire! Overheating and improper handling may

result in short circuits which can cause fires and explosions.

Important:

If there is a defect, contact your dealer immediately. Never disassemble the device!

The dealer will contact the service department. Never expose the device to water!

Protect the device from vibrations. Only use recommended batteries. Never mix

batteries - Always replace empty batteries with a complete set of full power batteries.

If the unit is not powered for a longer period of time or is not in use, remove the

batteries from the unit. The manufacturer accepts no liability for incorrectly inserted

batteries!

Содержание HP1000SE PRO
































































































Результаты поиска

Содержание HP1000SE PRO

Отзывы:

ECOWITT HP1000SE PRO, Руководство пользователя, Страница: 93 / 95

Результаты поиска

Содержание HP1000SE PRO

Отзывы: