Ecowell WCVP02, Руководство пользователя

Страница: 9 / 10

15 14
https://www.altonindustries.com
Fault Code Table
Error Code Causes
Solutions
E2
Rechargeable battery
voltage is too low
Replace the battery
Battery disconnect Replace battery
E1
E3
Rechargeable battery
voltage
abnormal
Replace the battery
E4
Temperature control of
battery is abnormal
Replace the battery
E5
High discharging
temperature Battery pack over temperature, do not use
until the battery temperature is restored
E6
High charging temperature
Battery pack over temperature, do not charge
until the
battery temperature is restored
E7
Low charging temperature
Make sure the ambient temperature is
above 5
℃
F1
Charging over-current
Please confirm whether the charger is
original
F2
Short-circuit protection
Please contact customer service
F3
Discharge Over-current
Please contact customer service
F4
Roller brush discharge
Over-current
Check whether there is any foreign body to
be cleaned at the roller brush. If the fault
still exists, please contact customer service
F6
No dirty water installed
Install dirty tank before use
Name and Content of
Hazardous Substances
Component
Content of hazardous substances
Plumbum
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Chromium VI
(Cr(VI))
Polybrominated
biphenyls
(
PBB )
Polybrominated
biphenyls
ethers
(
PBDE )
Plastic
Metal
Mercury(Hg)
Printed circuit
board assembly
Other metal
strutural parts
Standard parts
(screws/wash
ers, etc.)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
This form is prepared in accordance with SJ/T 11364-2014.
O means that the content of the hazardous substance in all materials of the part is below the
limit requirements specified in GB/ T 26572-2011.
X means that the content of the hazardous substance in at least one homogeneous material
of the part exceeds the limit requirements specified in GB/ T 26572-2011.
X parts show that due to the current technical and technological level restrictions, it is
impossible to
realize the complete replacement of non-environmental protection substances
or elements, and it will be gradually improved with the subsequent technical improvement.
*
Means that only part of the model contains the component.
info@altonindustries.com