6 |
P a g e
Installing base-plate
1.
Install the Expansion Screws
into the installation holes in
the toilet.
2.
Then install the Base Plate,
Pressing Plate, Gasket and
Screw as per the drawing and
tighten the Screws.
Note: Unfold the installation paperboard, place the paperboard over the toilet bowl from the tip, and
then insert the base plate to the paperboard breach to make sure base plate align with paperboard
breach.
Installation and Removal of Device
Installation:
Push the device back onto the base plate. Press until
you hear the
“Click”
sound. Check if the device is
stable and fixed properly.
Removal:
Press the
Remove Button
on the right side
until you hear the “
Click”
button. Now, pull
out the device.
Note:
Release hand from “remove button”
before pulling out the device.
