ECOVACS Deebot X1 OMNI, Инструкция по эксплуатации

Страница: 27 / 28

No. Malfunction Possible Causes Solutions
18 Mopping Pad Plate cannot rotate. The Mopping Pad Plate is blocked by foreign objects. Clean the foreign objects.
DEEBOT is too far away from the Station.
If it is beyond the available distance, the ECOVACS HOME App
can also be used to operate DEEBOT.
19 DEEBOT does not respond to the
Unplug the Station and wait for 10 seconds to plug again. Power
Station instruction.
off the robot and then turn it back on. Manually push the robot
DEEBOT and the Station are not paired. up to the Station, and ensure that the charging pins are correctly
connected. Then, DEEBOT will start charging, and voice prompts
pairing successful.
Communication interruption between the Station
Move DEEBOT near the Station to ensure smooth
20 Fail to enable Child Lock. and DEEBOT (For example: long distance or many
communication, and then enable Child Lock.
partition walls)
Please rotate and press the driving wheels to check whether there
21 Driving wheels are blocked Driving wheels are blocked by foreign objects.
is any foreign object wrapped or stuck. If there is any foreign
object, please clean it in time. If this problem persists, please
contact Customer Care for help
The Dirty Water Tank is not properly installed. Tap down on the Dirty Water Tank to ensure it is properly installed.
The sealing plugs in the Dirty Water Tank is not
Make sure to check that the sealing plugs are properly installed.
installed properly.
Double tap ® to see whether the Station can properly draw the
water. If the problem occurs during the mopping pads cleaning
When the water in the Cleaning
process, press and hold II> to finish the task, and then double tap
22 Sink is full and cannot be drained The Station cannot drain water normally.
® to see whether the Station can properly draw the water. If the
out, the voice reports that the water is successfully drawn, wipe dry the Water Overflow Sensor
Cleaning Sink is full.
of the Cleaning Sink If the Station fails to draw the water, check
between the Dirty Water Tank and the Station for foreign object
and clean it.
The suction port of the Cleaning Sink is blocked by Ensure that there is no foreign object in the suction port of the
foreign object. Cleaning Sink.
The voice prompt still exists after trying the above Unplug the Station and plug it again.If this problem persists,
solutions. please contact Customer Care for help.
27
IEII