- 11 -
Operating Instructions/
INSTRUCTIONS D'UTILISATION
1. Lighting Up The Display
Turn the key to the "ON" position, press the "ON/OFF" button on the display (Figure. 6-1), and the display
will be light up(It should show four red LED when fully charged). Note: The default pedal assist level is
"LOW" (Figure. 6-2).
2. Testing The Throttle,Pedal Assist, And Walk Assist Mode
The bike has three modes: throttle, pedal-assist, and walk-assist. Please lift the rear wheel, then test them
separately.
A. Throttle: please twist the throttle. It is on the right side of the handlebar (Figure. 6-3).
B. Pedal Assist: please lift the rear wheel and turn the pedal by hand. The motor will work once you turn
the crank 3/4-cycle (Figure. 6-4).
C. Walk assist: Please press and hold the “6km” button on the handlebar. The bike will go into a walk-assist
mode (Figure. 6-5).
