ECOTEST SPECTRA MKS-11GN, Руководство по эксплуатации, Страница: 35 / 93

34
2.3.3.6.2 Completing the identification process
After automatic or forced stop of the identification process the
following screen appears (Fig 10):
Figure 10 – Identification process completion
This screen shows the following data:
At the top of the screen, there is the ambient dose equivalent rate;
time in seconds since the start of identification, and pulse count rate
of gamma radiation. A field below will display radionuclides found,
or the message, saying “
Nuclides not found
” if radionuclides are not
detected.
In case radionuclides are detected, they appear in the
corresponding field in the format below:
NAME
CATEGORY PEAKS RELIABILITY, where:
•
NAME – the name of the radionuclide (e.g., Co
60
);
•
CATEGORY – the category to which the identified
radionuclide belongs (“NORM” - natural, “TECH” - industrial,
“MED” - medical, “SPEC” - special nuclear materials);