Ecotech Serinus 30, Инструкция по эксплуатации

Страница: 40 / 254

TÜV Rheinland Energie und Umwelt GmbH
Luftreinhaltung
Seite 40 von 253
Report on the performance testing of the Serinus 30 ambient air quality
monitoring system manufactured by Ecotech Pty Ltd measuring CO, Report
no.: 936/21221977/D_EN
EP_Ecotech_Serinus30_en.docx
6.1 4.1.5 Instrument design
The instruction manual shall include specifications of the manufacturer regarding the
design of the measuring system. The main elements are:
instrument shape (e.g. bench mounting, rack mounting, free mounting)
mounting position (e.g. horizontal or vertical mounting)
safety requirements
dimensions
weight
power consumption.
6.2 Equipment
Testing was performed using a measuring instrument for the determination of the power con-
sumption as well as weighing scales.
6.3 Testing
The set-up of the provided instruments was compared to the description in the instruction
manuals. The power consumption was determined for 24 h during normal operation in the
field test.
6.4 Evaluation
The measuring system has to be mounted horizontally (e.g. on a table or in a rack) and pro-
tected against weather. The temperature at the installation site may not exceed the range of
0 °C to 30 °C.
The dimensions and weight of the measuring system correspond to the specifications in the
instruction manual.
According to the manufacturer, the power consumption of the measuring system is 265 W at
maximum. In a 24-h test the overall power consumption was determined. The power con-
sumption as specified by the manufacturer was not exceeded at any time during the test.
6.5 Assessment
The specifications of the manual with regard to instrument design are complete and correct.
Does this comply with the performance criterion? yes
6.6 Detailed presentation of test results
Not required in terms of this criterion.