4 Settings
Position the eccentric screw (8) without the push bar/rod (10)
pointing forward by switching on the motor. (See Fig 1 or 2)
By unfastening the screw you can adjust the eccentric.
In the beginning don’t adjust a too large turn. Try to find out your
desired move in small steps.
The further you unfasten the screw the bigger the turn.
Position the screw of the trick-shaft and place the pump in a foreward
direction. Now the screw (7) is in front and can easily be adjusted.
Inclination may be changed with an adjustment screw.
OSCI-MOTION and the pump may not be blocked by obstacles
to avoid damage !
Be prepared to switch the power off if the movement of
OSCI~MOTION is blocked. Be sure to switch the power
off when you change position or turn.
OSCI MOTION
OSCI M
OTION
Fig. 1
Fig. 2
Fig. 2
5
5
5
8
8
8
10
10
10
