Ecostrad_Ecowärme_V1.2_09022022
11
5-2 | Setting the time
When you first turn on your Ecostrad Ecowärme Electric Radiator, the display will
prompt you to set the time and date. The screen shows 00:00 and the numbers 1-7
flashing, with an arrow pointing to 1.
If you wish to skip this step and go straight to the heating modes, press the Standby
Button and follow on from section
. Otherwise, to set the time:
1. Use and to choose the day of the week, represented by the
flashing numbers 1-7. Here, 1 is Monday, 2 is Tuesday, and so on.
The arrow will move to point at the day you choose. When
selected, press
to confirm.
2. The first 00 will now flash; these represent the hours. Use and
to set the hour and press
to confirm.
3. The second 00 will now flash; these represent the minutes. Use and to set
the minutes and press
to confirm.
4. The numbers 1-7 will now flash again. You can repeat the above process to
change anything if you made a mistake. When you are happy, press the Standby
Button to exit the menu.
5-3 | Standby mode
In standby mode the current room temperature and the standby icon
are displayed. In standby, the radiator does not heat. You can use the
button to switch between standby and the heating modes.
5-4 | Heating modes
Press the button to switch the radiator on. Press the MODE button to switch
between the modes. The icon on the display will change accordingly, browsing
through: Comfort , Eco , Frost , and Auto mode
.
In Comfort, Eco and Frost modes the screen will display the set temperature. You can
use the icon to view the current room temperature, indicated by the symbol.
There is also the option for the screen to display the room temperature when in auto
mode, instead of the set temperature. This can be changed in section
. No
matter whether room or set temperature is displayed in auto mode, the icon can
still be used to view the alternate reading.
When heating, the
symbol will appear.
