manualshive.com logo in svg

ECOSTAR WM06-700, Инструкция пользователя, Страница: 17 / 26

Поделиться
Скачать
ECOSTAR WM06-700 Скачать руководство пользователя страница 17

In

st

all

at

io

n

Before connecting the Water Supply Hose to the water tap, check the hose type and choose the correct instruction 
here under.
Note that the Water Supply Hose supplied may vary from country to country, Make sure to connect the blue inlet 
hose to the COLS water tap, and the orange inlet hose to the HOT water tap.

Connecting Water Supply Hose to water tape

Normal Type

(Normal tap without thread & screw type inlet hose)

Untighten the screw of the connector so that the tap 
can be placed in the middle

Untighten the screw

Fixing the connector to the tap

Push the upper connector up till the rubber packing is 
in tight contact with the tap, then tighten the 4 screws.

Attach the water supply hose securely to 
the connector

Push the water supply hose vertically upwards so that the rubber 
seal within the hose can adhere completely to the tap

Check the connection of water supply hose and the connector

Fixing the connector to the water supply hose

Attach the water supply hose to the connector and then tighten it 
by screwing it to the right

After connecting the hose, open the tap to check for any water 
leakage.
If the water leaks, close the tap and start again from step 1.

The washing machine is to be connected to the water mains using new hose-sets and old hose sets should 
not be reused.

Rubber Packing

Connector

Screw

Connector

Water Supply Hose

Connecting Water Supply Hose

In

st

al

la

ti

o

n

15

Содержание WM06-700



























Отзывы:

Нет отзывов