USER MANUAL
Ecosolaris ECO-LIGHT Solar LED Batten Light
Kit
100% Green
Energy
Rechargeable
Lithium Battery
PIR Motion
Sensor
IP65 Rated
Waterproof
5V USB
Charge
Integrated
Design
WHAT IS IT?
ECO-LIGHT is an innovative model of solar powered tube light. It can be used in many
applications, such as office, home, garage, caravan, carports, warehouses, camping tents,
kinds of shelves, farm tents, sideways, emergency camps, aid tents, any types of sheds, etc.
The ECO-LIGHT solar led batten light kit contains everything, like rechargeable lithium
battery, solar controller, and the solar panel. The installation is easy and can be done in less
than 15 minutes. You just need to plug solar panel into the light with the DC connector. It
provides a high brightness for long time continuous lighting output and the inbuilt PIR
sensor allow to save power if sunshine is not strong enough.
This solar LED batten light can also work during daytime while being charged, under manual
operation. By programming the remote control, you can increase or decrease the brightness
as you like. 2 hours, 4 hours and 6 hours lighting modes can be selected. By pressing the
button on the fluorescent tube, you can select one of the 3 lighting modes. The brightness
and duration of lighting may be set with the remote control.
One 5V USB output was added to charge your mobile. What’s more, an external switch is
allowed to be connected to this light via a DC port. The ON/OFF and brightness can be
operated by hand just like the traditional lights. This is a very useful feature when it is
necessary to control lighting manually rather than automatically.
In conclusion, the ECO-LIGHT solar LED batten light is the ultimate lighting solution for
remote locations without power or light
ACCESSORIES
1.
Push Button (100% power / 50% power / 30% + sensor 100% / OFF).
2.
USB 5V 1A Output (To charge mobile or other device).
3.
DC input connector to connect to (6) plug to wall switch.
4.
DC input to charge connector for solar panel 6V input (Warning : do
not use other device or solar panel to charge).
5.
Motion sensor (Two options on remote: 0% + 100% for 24 hours;
30% + 100% for 12 hours).
6.
Wall switch for extension control (same function as push button (1)).
CONNECTION DIAGRAM
WALL SWITCH
Wall Switch is a very useful components in this kit.
You can use this useful solar light fixture in the same
way of using a 120V normal light.
1st push : 100% power
2nd push : 50% power
3rd push : 30% when nobody there and go to 100%
power when sensor is triggered
4th push : Light OFF
(These 4 working programs are looped)
REMOTE CONTROL
MANUAL – switch ON/OFF, 100% full power
AUTOMATIC – ON/OFF up dawn & dark, 100% power
Increase the brightness by 20%
Decrease the brightness by 20%
Light is 0% (off power)
Turn ON when the sensor is triggered
Light is ON with 30% power and 100% when sensor is triggered
Set light to work for 2 hours
Set light to work for 2 hours
Set light to work for 6 hours
PACKAGING CONTENT :
Solar Batten Light
1 piece
Solar Panel + 5m cable + 2 brackets
1 piece
Wall Cont 4m cable
1 piece
Remote Control
1 piece
Fixing dowels and SST304 screws
1 piece
User manual
1 piece
ADVANTAGES :
1.
ON/OFF mode Night & Day (works manually day and night).
2.
130 degree motion detection area.
3.
Manual dimmer mode
4.
Timer mode : Turns ON/OFF automatically after 2H, 4H or 6H.
5.
Automatic Mode : Working from dusk to dawn automatically.
