Ecosoft KPOMPROECO, Установка и использование

Страница: 5 / 32

ENG
5 4
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2018
INSTALLATION AND USAGE OF BOOSTER PUMP FOR DOMESTIC REVERSE OSMOSIS FILTERS
Install these
push-fit tee
and run tubes
to the pump
Remove the tube
connecting 3
rd
pre-filter with
auto shut-off valve
It is necessary to read this manual carefully before installing the pump.
All of the requirements mentioned in this manual, as well as the requirements of all of the
applicable local and national building, electrical, and technical regulations and standards must be
met when installing and operating the unit.
The unit is to be supplied with single-phase 230 VAC, 50 Hz electrical power.
The unit is supplied with power cord and can be connected to a properly installed IEC 60884-1
compliant socket. Electrical specification of the unit can be found on manufacturer's factory sticker.
3.3.1. Verify that all parts listed in Section 2.3 are in the package in proper condition.
3. INSTALLATION AND CONNECTION
3.1. PUMP INSTALLATION SAFETY MEASURES
3.2. CONNECTING THE UNIT
Connect the pump
to 3rd pre-filter and
auto shut-off valve
with these tubes