6
When your handlebars are properly set up, adjust the angle of the handbrake so
that they are easily accessible when your hands are on the handlebars.
The angle of the handbrake levers is generally a straight line from your shoulders
through your hands to the brakes. Tighten the position of the handbrake levers in
this position by tightening the hex nut with a 5mm hex key or allen wrench.
Attaching your free bell
Your folding bike comes with a free bell. It is recommended to attach the bell to the
right side of the handlebars. Loosen the screw on the attachment ring completely
with a screwdriver. Place the attachment ring around the handlebars and replace
and tighten the screw. The bell is rung by flicking the small tab.
Attaching your Mudguards and reflectors
This folding bike comes with the front and rear mudguards, you need attach them on the fork
and under the seat separately.
Front mudguard and its parts Reflectors
Rear mudguard and its parts Install front reflector
Install front mudguard Install Rear mudguard and reflector
