6
This bike comes with a kick stand, loose the left side nut on the axle of rear wheel,
attach it to the axle of the rear wheel, then put back the nut, tighten it.
Connecting the front brake cable
First release the front brake cable, then insert the end of cable into the hole of front
brake lever, adjust the cable, lock the nuts, finally use Allen Key to set the brake
pads to right position.
A: Release the brake cable B: Insert the cable into the hole
C: Lock the cable D: Rotate the lever and adjust the angle
Adjusting the angle your handbrake levers
Your bike has front and rear hand brake levers. The two levers require angle
adjustment and tightening for comfort and safety.
When your handlebars are properly set up, adjust the angle of the handbrake so
that they are easily accessible when your hands are on the handlebars.
