4
Operation
The following are the general procedures for this smart bulb to be “included” into the
network.
1
Screw the bulb into a standard E26 socket.
2
Open Amazon Alexa (if you are using Amazon Echo Plus) or SAMSUNG
SmartThings App.
3
Add the smart LED bulb to the hub.
4
Control your lighting
See reverse side for specific Amazon Alexa (only if you are using Amazon
Echo Plus) and SmartThings instructions
□
Dimming
The LED bulb will dim to 1% -100% range using the hub app.
Reset to Factory Setting
□
Color Tuning
Use the hub app to adjust Color Temperature (CCT) of the LED bulb.
□
Download or update your hub manufacturer’s app.
□
Turn on the LED bulb with the wall switch.
□
The LED bulb will flash twice when turned ON to indicate that the bulb is in pairing mode.
□
Open hub manufacturer’s app and follow pairing instructions. See reverse side for specific Amazon Eco Plus,
and SmartThings instructions.
□
After successful pairing with the hub the LED bulb will flash twice.
□
Control the LED bulb through your device (the wall switch must remain ON).
□
The LED bulb will be ready to control only after successful pairing to the hub.
□
The LED bulb is not designed to work with wall dimmers or other controlled lighting systems.
□
Works with Amazon Eco Plus and SmartThings hubs only.
□
Refer to hub manufacturing instructions or website for scene setting, scheduling and any other app features.
□
Using the wall switch, physically switch ON and OFF 6 times within 5 seconds.
□
The LED bulb will flash twice after a successful reset.
Basic Instructions
NOTE:
Ensure the hub is powered on and within range of this LED bulb.
NOTE:
If the bulb will not join the network after repeated attempts, please use the Factory Reset
procedures to clear the bulb’s settings.