5
HOMEDEPOT.COM/ECOSMART
Please contact 1-877-527-0313 for further assistance.
Unpairing the LED Bulb
Position the remote (B) within 2 inches of the LED Bulb.
Operation (continued)
□
Turn the bulb on and hold the remote within 2 inches of the LED bulb.
□
□
□
□
□
until the LED Bulb (A) is detected.
NOTE:
1. The existing linked LED bulb may blink. If this occurs, press any button on the remote to stop
the blinking. Then proceed with repeating the linking process.
2. One remote controls up to 20 LED bulbs.
Press and hold the ON/OFF button (BB) and Dimming button (CC) at the same time for 3 seconds.
(B) will remain on for 3 seconds. This indicates that the LED bulb (A) and remote (B)
have been successfully linked.
AA
BB
CC
DD
EE
NOTE:
Only one LED Bulb will be unpaired at a time. To unpair all the LED Bulbs simultaneously, reset all
the LED Bulb and remote by following the instructions in the factory default section of the instructions.
To unpair the LED Bulb with the remote, hold down the ON/OFF button (BB) and the Customize White Light
underway.
If you want to unpair a LED Bulb that was already paired with a remote,
you need to proceed to Step “Unpairing the LED Bulb” with original remote
and then proceed to Step “Pairing the LED Bulb” to pair it with the preferred
remote.
one
Reset to Factory Setting
□
Using the wall switch, physically switch ON and OFF 6 times within 5 seconds.
□
