Set your Refresh!
™
on the top
shelf of your refrigerator. Check to
be sure the unit cord and adapter
cord will reach an available outlet.
PLEASE NOTE: If you have a
side-by-side refrigerator,
install
Refresh!
™
on the inside of the
outer wall.
Installation next to the
freezer will be difficult and may
not perform properly.
Option 1: Refresh!
™
cord routing outside and
behind refrigerator. For example only, your
application may be different than pictured.
4. Apply the other part of the self-
adhesive Velcro
™
to Refresh!
™
.
2. Make sure the installation area is
CLEAN and DRY.
BEFORE YOU INSTALL YOUR REFRESH!
™
Option 2: Refresh!
™
cord routing inside and
along bottom of refrigerator. For example
only, your application may be different than
pictured.
When deciding where to install your Refresh!
™
keep in mind:
1. To accommodate various types of
refrigerators, the flat cord may be routed in
many different ways, depending on where
you locate the unit.
2. Your Refresh!
™
will be most effective if
placed above the top shelf.
3. The flat cord must pass under the door
gasket.
INSTALLING YOUR REFRESH!
™
1. Determine installation location and check cord lengths (see BEFORE YOU INSTALL
YOUR REFRESH!
™
, previous page).
3. Apply one part of the self-adhesive
Velcro
™
pad to the inside of your
refrigerator, above the top shelf.
5. Press Refresh!
™
onto the Velcro
™
pad inside the refrigerator.
Continues on next page >
4
5