9
TROUBLESHOOTING
Indicators of Operation
Operation of the ion indicator lamps:
Turn the unit on and check that the small red/orange lamp is illuminated. The
lamp is located inside the unit and is viewed by looking into the unit through the
front grill. Illumination of the internal lamp verifies that the frequency type ionizer
and needlepoint ionizer are functioning properly. The lamp should stay
illuminated as long as the unit is turned on.
REPLACING THE FUSE
A fuse holder is located on the back of
the unit next to the power cord. To
replace or check the fuse, unscrew the
fuse holder cap by turning it
counterclockwise then remove the cap
and fuse.
If the fuse is blown, replace with a new
slow blow type fuse. Insert the new
fuse into the fuse holder and replace
the fuse holder cap.
If the fuse holder cap is not installed
correctly, the unit will not operate.
Fuse
CAUTION! - Disconnect power cord before servicing.
100,110 volt models - use 1.0 Amp slow blow fuse.
220 volt models - use 0.5 Amp slow blow fuse
