5
5. INSTALLATION
1).Remove unit from shipping carton.
2).Remove all protective materials.
3).Check for shipping damage and loose or broken parts.
4).
Read Owner’s Manual thoroughly prior to installation.
5).Fully insert cord into the power cord receptacle on the back of the unit.
6). Determine placement location for the unit (page 6), plug the unit into a
110 volt outlet. Make sure the power switch is on, and adjust
controls according to the application.
6. BACK COVER & HEPA FILTER, CARBON FILTER REMOVAL
Step 1:
Unplug the air purifier to prevent
electric shock when you want to wash or
maintain the
unit.
Step1
Step2 Step3 Step4
Step 2:
Push two latches down on back cover.
Step 3:
Remove HEPA filter by draw out the white ribbon on the top.
Step 4:
Draw out each filter with white ribbons
