PRINCIPLES OF OPERATION
Nature cleanses the air with the lightning and rain. Lightning bolts produce ozone,
as well as positive and negative ions which cleanse the air naturally. Rain helps
bring the ozone and ions closer to the earth's surface. They are then attracted to
atmospheric contaminants that are either removed from the air and attached to
grounded objects or are oxidized.
The Flair reproduces the natural conditions found in the outdoors. It is not
designed to create an artificial environment. The re-establishment of a natural
environment takes place out in the air, rather than inside the unit. It cleanses the
air, rather than filtering it, masking the symptoms, or attempting to dilute it. The
Flair also has a mode that will effectively sanitize an unoccupied area.
PRE-INSTALLATION AND INSPECTION
1. Remove unit from shipping carton
2. Remove all protective materials
3. Check for shipping damage and loose or broken parts
4. Read Owners Manual thoroughly prior to installation
5. Remove plates from the box and install plates - See “SynAirG
TM
Purification Plate
Installation” page 5 (220/240 volt models, skip to step 3)
6. OPTIONAL: Plug the unit into a proper outlet for your voltage (100, 110, 220/240
volt), place in shipping box with unit on and purifier knob set to maximum for at
least one hour to remove traces of manufacturing odor.
7. Determine placement location for the unit, plug the unit into a proper outlet
for your voltage (100, 110, 220/240 volt) and adjust controls according to the
application. (See “Placement of Unit” Page 6 and “Setting Unit Controls” Page 7)
4
�����
Lint Filter
Power
Switch
Power Cord
Ozone Control
Fan Control
Sanitizer
Feature Button
Front Grill
