WARRANTY COVER:
CONTACT:
Ecopoint Limited guarantees this luminaire
to be free from failures resulting from
faulty materials or workmanship for a
period of 5 years from the date of invoice.
Retain the invoice as proof of purchase in
the event of a warranty claim.
Failure resulting from misuse, accident,
neglect or improper operation,
maintenance, installation, modification or
adjustment are not covered by this
warranty.
Ecopoint Limited must be notified within
30 days of the alleged defect being first
identified.
Please refer to standard Warranty Terms
and Terms and Conditions of Sale for full
detail; these are available at
www.ecopoint.co.nz
For any service or support enquiries,
please call Ecopoint head office during
normal business hours (Monday to Friday)
or contact us via any of the means listed
below.
Ecopoint Limited
2 Jarden Mile, Ngauranga, Wellington 6035
PO Box 12646, Thorndon, Wellington 6144
P: +64 4 499 3636 or
0800 695 949
W: www.ecopoint.co.nz
MAINTENANCE:
To avoid risk of harm to the luminaire or maintenance personnel, always en-
sure that the luminaire is switched off and cooled down prior to undertaking
any maintenance activities.
If maintenance tasks involve exposing any electrical components, ensure
that mains power is disconnected prior to any works.
This product should only be cleaned with a damp cloth; do NOT use any
chemical cleaning agents and/or solvents.
If dust accumulates on the inside of the diffuser, simply slide the end
-
caps of
the luminaire body off, slide the diffuser out, wipe down with a damp cloth
and allow to dry before reversing the process. CARE MUST BE TAKEN TO NOT
TOUCH ANY LEDS AND NOT ALLOW ANY MOISTURE TO COME IN CONTACT
WITH THE LEDS.
REMINDER: No components of this luminaire are serviceable by the user,;
damaged components may only replaced or repaired by the manufacturer or
approved agent.
IMPORTANT:
Surface Mount Batten
Gen 2
| Product Instructions
55 mm
1550 mm
10
0 m
m
Mass:
2.2 kg (all models)
DIMENSIONS:
FOR YOUR SAFETY AND THE LONG
-
TERM RELIABILTY OF THIS PRODUCT, READ AND
FOLLOW ALL INSTRUCTIONS TO PREVENT HARM TO THE LUMINAIRE, INSTALLER OR
PROPERTY.
Installation requires knowledge of electrical and luminaire systems; installa-
tion must only be completed by a licenced or suitably qualified electrician.
Disconnect power before installation.
Do not alter pre
-
existing holes or drill new holes unless instructed to do so
according to this manual.
Do not expose wiring to sharp objects or edges of sheet metal, always check
clearances prior to any drilling and de
-
burr edges.
No components of this luminaire are serviceable by the user, and there is
danger of personal and/or property harm if the luminaire is modified or dis-
assembled.
If any luminaire components are damaged, they shall be exclusively replaced
by the manufacturer or approved agent.
