LS
MS
HS
115
VAC
NTL
LS
MS
HS
115
VAC
NTL
LS
MS
HS
115
VAC
NTL
LS
MS
HS
115
VAC
NTL
WD-03, 1-Speed ECM Fan
WD-04, 2-Speed ECM Fan
WD-06, 2-Speed ECM Fan
WD-05, 3-Speed ECM Fan
115VAC
Power
115VAC
Power
115VAC
Power
115VAC
Power
High Speed
High Speed
High Speed
High Speed
Med Speed
Low Speed
Low Speed
Low Speed
Ground
Ground
Ground
Ground
Fan
Fan
Fan
Fan
Power
Power
Power
Power
Screw
Screw
Screw
Screw
Electrical box
on the Fan.
Electrical box
on the Fan.
Electrical box
on the Fan.
Electrical box
on the Fan.
FC3J Control
FC3J Control
FC3J Control
FC3J Control
115VAC
115VAC
115VAC
115VAC
Neutral
Neutral
Neutral
Neutral
*Black wire from fan motor may be
solid black or black with white stripe.
*Black wire from fan motor may be
solid black or black with white stripe.
*Black wire from fan motor may be
solid black or black with white stripe.
*Black wire from fan motor may be
solid black or black with white stripe.
26072 Merit Circle #110 / Laguna Hills, CA 92653
949-916-0945 Fax 949-458-8502
www.eControlsUSA.com
Warranty
This product is warranted to be free of defects due to workmanship or
materials under normal use and service for a period of 5 years from
date of installation and not longer than 6 years from manufacturing
date code.
eControls
eControls
Ensure that the cable is completely plugged into the “RED”
connector on the WTT and the FC3J. You should hear the
connectors click. Ensure that the fan is powered. Ensure the
wiring from the FC3J fan control to the whole house fan is
correct.
The WTT LCD is not lit.
Ensure that the number of speeds set in Step 9 correspond to
the type of fan installed - 1-speed, 2-speed or 3-speed fan.
Fan speeds available is not correct.
TROUBLESHOOTING
If On is not blinking and the WTT is in Temperature Control,
make sure the Set To temperature is a few degrees lower than
the Indoor temperature. On will blink when the fan is running.
If an outdoor temperature sensor is installed and the outdoor
temperature is above the limit set, whole house fan operation
may be delayed. When delayed, “LIMIT” blinks.
If On is blinking but the fan is not running, check the wiring
from the FC3J fan control to the whole house fan.
The display indicates On but the fan is not running.