Setting the Nighttime Airflow in Heating
This option enables the user to set the maximum allowable upstairs
airflow in heating DURING NIGHTTIME OPERATION, not to exceed
the installer set maximum allowable upstairs airflow in heating.
Night
Upstairs
Downstairs
Airflow %
MENU
ENTER
Heat
Touch the
key to display
NIGHTTIME, UPSTAIRS AIRFLOW IN
HEATING indicated by nAF Heat.
Touch the
UP/DOWN
keys to adjust the
airflow.
Touch the
MENU
key to save and go to
next option or touch the
ENTER
key to
save the options and return to normal
thermostat operation.
MENU
Setting the Nighttime Airflow in Cooling
This option enables the user to set the maximum allowable upstairs
airflow in cooling DURING NIGHTTIME OPERATION, not to exceed
the installer set maximum allowable upstairs airflow in cooling.
Night
Upstairs
Downstairs
Airflow %
MENU
ENTER
Cool
Touch the
MENU
key to display
NIGHTTIME, UPSTAIRS AIRFLOW IN
COOLING indicated by nAF Cool.
Touch the
UP/DOWN
keys to adjust the
airflow.
Touch the
MENU
key to save and go to
next option or touch the
ENTER
key to
save the options and return to normal
thermostat operation.
NEXT
NEXT
Selecting Manual or Auto Airflow
This option is only displayed if your installer enabled Manual Airflow
Control during installation. AUTOMATIC AIRFLOW is the default. In
AUTOMATIC AIRFLOW CONTROL, the airflow is adjusted by the
thermostat. In MANUAL AIRFLOW CONTROL, the user must adjust
the airflow. The airflow range is defined by the installer during set up.
Upstairs
Downstairs
Airflow %
MENU
NEXT
ENTER
Touch the
MENU
key until the following
thermostat screen is displayed.
Touch the
UP
key to select AUTO. Touch
the
DOWN
key to select MANUAL.
Touch the
key to save and go to
next option or touch the
ENTER
key to
save the options and return to normal
thermostat operation.
MENU
Auto
Cleaning the Touch Screen
This option disables the touch screen for 30 seconds to enable the
user to clean the touch screen by wiping down with a soft, damp cloth.
Touch the
MENU
key to display the CLEAN DISPLAY option indicated
by CL. The timer will count down and return to normal thermostat
operation after 30 seconds. The remaining time is displayed on the
screen.
NEXT
ENTER
Touch the
MENU
key to display CLEAN DISPLAY
option indicated by CL.
Press
ENTER
to start the 30 second count down.
The touch screen is disabled during this time.
Or, press
NEXT
to return to normal thermostat
operation.
Install Two AA Batteries
The batteries power the clock when
24VAC power is lost. Slide the battery
cover downward and install the two AA
batteries as shown.
- + - +
Warranty
This thermostat is warranted to be free of defects due to workmanship or
materials under normal use and service for a period of 5 years from date of
installation and not longer than 6 years from manufacturing date code.
949-916-0945 www.Comfort365USA.com
eControls, 26072 Merit Circle #110, / Laguna Hills, CA 92653
eControls
eControls
Inside
Upstairs
Auto
Downstairs
Airflow %
Schedule
Cool
Set To
COOL
AUTO
FAN
MENU
MODE
SYSTEM
If the C365 detects a communication
error with the wireless Upstairs
temperature sensor or sensors, a
blinking message appears where the
time is normally displayed. The display
will alternately show Snr and the sensor
number.
How to test the wireless sensor communication can be found in the
Installers Manual.
Error Messages
Inside
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FAN
MENU
MODE
Cool
Set To
SYSTEM
Homeowner resources are available
online at www.Comfort365USA.com,
including a consumer video
describing the features and outlining
the operation of the Comfort365.
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FAN
MENU
MODE
Cool
Set To
SYSTEM
AM
The thermostat will display nP when
power is lost. The batteries will maintain
the time and once power is restored, the
thermostat will return to normal
operation.
Check that the batteries are installed
correctly or replace them if they are old.
