Econo CAM-20XB, Руководство пользователя, Страница: 19 / 27

- 19 -
4) Button
operation operation operation operation
The unit and
operation
board is connecting with working, you can operate the unit
directly.
In Off mode, press button to modify the mode of
air-condition and water
heater integrated unit
: refrigeration—heating—heat water
In normal, press button last 3 second enter the air-conditioning manual
defrosting, the defrosting sign flicker, After 5 seconds reach defrost conditions
and the system is displayed , otherwise not display.
In normal, press button enter set the parameter scan ,press button again,
and enter the sensor of temperature scan ---press
、
to select the parameter
which is needed to scan .
Scan the sensor temperature sensor status browsing settings parameter status
5). System parameter setting
In normal, press button 3 seconds enter the parameter setting, press
、
button
may be adjusted upwards or downwards, then press button last 3 seconds enter the next
setting of the parameters .
Parameter setting states: the fifth section is -5 degrees. the middle figure is parameter settings,
The bottom of a small number for the several parameters.
（
1
）
In Off mode, press button and enter the parameter setting of the frist section :set the