Brake-sets adjustment
Make sure that the brake pads are not rubbing or locking the front /
rear disc, while you're not pressing the brake-levers.
•
In case in which the disc rubs / locked into the brake pads. Release
a bit both of the caliper screws (the screws that connect the caliper
to the fork), tightly press on the brake - lever and re-screw back the
screws into their place while continuously pressing on the lever.
• you can adjust the brake sensitivity by tightening / releasing of the
small Helen screw which located between the brake lever and the
handlebar.
10
Warning!
It is highly recommended that the brakes will be adjust and
maintained by professional bike store!
Warning!
Always check the brakes before using your bike and make sure
they are well operating.
