4
Regularly check the functionality of chain brake.
5
Do not fill the chain oil near fire. Never smoke when you fill the chain.
6
National regulation may restrict the use of the chain saw.
7
If the equipment gets ea impact or fall, check the condition before
continuing work. Check the controls and safety devices for malfunction.
If there is any damage or doubt, ask our service center for the inspection
and repair.
8
Always activate the chain brake before starting the chain saw.
9
Hold the saw firmly in place to avoid skating(skid movement )or
bouncing of the saw when starting a cut.
10
At the end of the cut, be careful to keep your balance due to the "drop".
11
Take into account the direction and speed of the wind. Avoid sawdust
and chain oilmist.
PROTECTIVE EQUIPMENT
1
In order to avoid head, eye, hand or foot injuries as well as to protect
your hearing the following protective equipment must be used during
operation of the chainsaw:
The kind of clothing should be appropriate, it should be tight-fitting but
not be a hindrance. Do not wear jewelry or clothing which could become
entangled with bushes or shrubs. If you have long hair, always wear a
hairnet.
It is necessary to wear a protective helmet whenever working with the
chain saw. The protective helmet is to be checked in regular intervals for
damage and is to be replaced after 5 years at the latest. Use only
approved protective helmets.
The face shield of the protective helmet(or the goggles)protects against
sawdust and wood chips. During operation of the chain saw always wear
a goggle or a face shield to prevent eye injuries.
Wear adequate noise protection equipment (ear muffs, ear plugs, etc.)
The protective jacket consists of 22 layers of nylon and protects the
operator against cuts. It is always to be worn when working from
elevated platforms (cherry pickers, lifts), from platforms mounted on
ladders or when climbing with ropes.
The protective brace and bib overall is made of a nylon fabric with 22
layers and protects against cuts. We strongly recommend its use.
Protective gloves made of thick leather are part of the prescribed
equipment and must always be worn during operation of the chain saw.
During operation of the chain saw safety shoes or safety boots fitted
with anti skid sole, steel toe caps and protection for the leg must always
to be worn. Safety shoes equipped with a protective layer provide
protection against cuts and ensure a secure footing For working in trees
the safety boots must be suitable for climbing techniques.
VIBRATION
1
Individuals with poor circulation who are exposed to excessive vibration
may experience injury to blood vessels or the nervous system. Vibration
may cause the following symptoms to occur in the fingers, hands or
wrists: Falling asleep (numbness), tingling, pain, stabbing sensation,
alteration of skin colour or of the skin.
If any of these symptoms occur, see a physician!
To reduce the risk of
"white finger disease", keep your hands warm during operation and well
maintain the equipment andaccessories.
SAVE THESE NSTRUCTIONS
WARNING!
DO NOT let comfort or familiarity with product(gained from
repeated use)replace strict adherence to safety rules for the subject
product MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY PACK
1
Before using battery pack, read all instructions and cautionary markings
on(1 )battery charger,( 2)battery, and (3)product using battery
2
Do not disassemble batterypack.
1
1
1
https://www.altonindustries.com
12
