Note:
If a network was detected in step 3, the SSID is automatically
entered and cannot be changed.
7.
Enter a SSID into the
Network Name
box.
8.
In the
Connects to:
box, select where your network connects to
(The Internet
or
Work).
9.
If you want to connect to an ad-hoc connection, tap the
This is
a device-to-device (ad-hoc) connection
checkbox.
10.
If authentication information is needed, from the
Configure
Wireless Network
screen, tap the
Network Key
tab.
Note:
To determine whether authentication information is needed, see
your network administrator.
11.
To configure the type of network authentication to use, select:
a.
To use Shared Key authentication, tap the
Authentication (Shared mode)
listbox. Type the
network key in the
Network Key:
box.
b.
To use data encryption, tap the
Data encryption (WEP
enabled)
listbox.
c.
If a network key is provided by your network
automatically, tap the
The Key is provided for me
automatically
checkbox.
12.
For increased security, tap the
802.1x
tab and select the
Use
IEEE802.1x network access control
checkbox. You should only
check this option if it is supported by your network
environment. Ask your network administrator if you are unsure.
13.
Select EAP type (PEAP or Smart Card/Certificate) from the
listbox.
14.
Once you have completed entering the network settings, tap
OK
twice to save your settings and exit this menu.
