Ecom Instruments CN ATEX Series, Инструкции по безопасности

Страница: 9 / 16

22
10. Repair
Repairs are to be conducted by ecom instruments GmbH or by personnel or service
centres authorised by ecom instruments GmbH, because the safety of the unit needs to
be tested after repairs are implemented.
ecom instruments GmbH has the following partner for repairing this device:
Intermec Technologies GmbH
Repair Center Central Region
Burgunderstraße 21
40549 Düsseldorf
Germany
Tel.: +49 (0) 211 / 53601 – 499
Fax.: +49 (0) 211 / 53601 – 52
www.intermec.de
In order to avoid unnecessary shipments and to save time please send your device
together with a completed repair advice note to the address specified above.
Additional administration is effected via the ecom instruments GmbH service department.
11. Cleaning, maintenance and storage
- Only use a suitable cloth or sponge to clean the unit. Do not use any solvents or abra-
sive cleaning agents when cleaning.
- It is recommended that you have the functionality and accuracy of the unit inspected
by the manufacturer every two years.
- The batteries should be removed from the unit during prolonged periods of storage.
- Do not allow storage temperatures to exceed or fall below the permitted values!