Generating Electrolyzed
Water for Cleaning &
Degreasing
Generates potassium hydroxide (KOH) with an
ORP between -100 and -300.
1. Add tap water (or purified water) up to the 1 Liter mark
2. Add 2 grams of potassium carbonate *
3. Place lid and plug-in the power supply **
4. Power On to Setting 3 to generate KOH in 8 minutes
* Use only the potassium carbonate additive.
** Power supply must be dry
Measuring
Hypochlorous
Acid (HOCl) Solutions
THINGS TO KNOW:
•
The molecular formula for hypochlorous acid is HOCl
•
HOCl is a free chlorine molecule that can be measured with chlorine test paper
•
HOCl is most dominant in a chlorine solution between pH
4
and 6
HOW TO MEASURE THE CONCENTRATION OF
HYPOCHLOROUS ACID
Chlorine test paper provides a simple, reliable, and economical means to measure the concentration of free
chlorine in sanitizing solutions. With color matches at 10, 50, 100 and 200 ppm, the test paper measures
concentrations between 10 and 200 ppm. In the food industry, federal, state and local health regulations
require users of chlorine-based sanitizer solutions to have appropriate test kits available to verify the
strength of sanitizer solutions.
To learn more about hypochlorous acid sanitation and disinfection,
visit the research database at: EcoloxTech.com/research
1.
Keep out of reach of children.
2.
Store additives in a clean and dry location.
3.
Only use normal tap water or purified water.
4.
If the unit becomes damaged or leaks, immediately
disconnect from the power supply at the wall.
5.
Do not immerse the system into water. Do not clean
in a dishwasher.
6.
To clean unit, rinse only with tap water.
7.
The unit can cause electric shock if not used properly.
8.
Empty the pitcher after use and rinse with tap water.
PRECAUTIONS
1 LITER MARK
Disclaimer:
The content of this document is furnished for informational use only and is subject to change without notice.
EcoloxTech assumes no responsibility or liability for errors or inaccuracies in the content of this manual.
