https://ecologicmart.com
Page 4
How to Use the lamp
For an adequate use of the lamp we will show different parts of the process such as
charging, use and care.
Charging Process
The battery may arrive empty; it is recommended that you make a full charge before the
first use.
The charging process is done as follows:
1.
Connect the USB cable to the AC adapter or another
5V USB source (radio, USB port, solar charger, power
bank).
2.
Connect the micro USB connector to the base of the
lamp (the connector does not enter 100%, do not
worry).
3.
The charging process is shown by the blue indicators.
4.
1 flashing LED indicates that the load is between 0
and 25%.
5.
1 stable LED and the second flashing indicates that
the load is between 25 and 50%.
6.
2 stable LEDs and the third flashing indicates that the load is between 50 and
75%.
7.
3 stable LEDs and the fourth flashing indicates that the load is between 75 and
100%.
8.
4 stable LEDs indicate that the charge is complete.
I
F YOU ARE USING THE LAMP WHILE CHARGING AND FLICKER BOTHERS YOU
,
YOU CAN TURN OFF
THE INDICATORS BY PRESSING THE SIDE SWITCH
.
Turning On and Light Intensity
Each head has a separate switch, so you can have different light levels and light colors in
each one.
