© 2019 Ecolink Intelligent Technology Inc.
PN TILT-ZWAVE5
S2 Encryption
The sensor uses industry standard elliptic key cryptography to encrypt all sensitive
communications. The DSK code is located on the device below the QR codes. The
DSK is used for authenticating the encrypted command classes in the table above.
A Security Enabled Z-Wave Controller must be used to fully utilize the product.
COMMAND CLASS NAME
VERSION
SECURED USING S2
ENCRYPTION
ASSOCIATION
2
Yes
ASSOCIATION_GRP_INFO
1
Yes
BATTERY
1
Yes
BASIC
2
Yes
CONFIGURATION
1
Yes
DEVICE_RESET_LOCALLY
1
Yes
FIRMWARE_UPDATE_MD
4
Yes
MANUFACTURER_SPECIFIC
2
Yes
NOTIFICATION
8
Yes
POWERLEVEL
1
Yes
VERSION
3
Yes
WAKE_UP
2
Yes
ZWAVEPLUS_INFO
2
NA
SECURITY_2
1
NA
SUPERVISION
1
Yes
TRANSPORT_SERVICE
2
NA
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Re-orient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment to an outlet on a different circuit from
the receiver
•
Consult the dealer or an experienced radio/TV contractor for
help.
Warning: Changes or modifications not expressly approved by Ecolink
Intelligent Technology Inc. could void the user’s authority to operate the
equipment.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
C’et appareil est conforme la norme d'Industrie Canada exempts de licence
RSS. Son fonctionnement est soumis aux deux conditions suivantes: (1) c’et
appareil ne peut pas provoquer d'interférences, et (2) c’et appareil doit
accepter toute interférence, y compris les interférences qui peuvent causer
un mauvais fonctionnement de la dispositif.
FCC ID: XQC-TILTZWAVE5
IC: 9863B-TILTZWAVE5