w w w . e c o l a w n a p p l ic a t o r . c o m
Turf Pros #1 Top dresser
P a g e
13 | 16
Issue: The spreader's hopper is full. The conveyor has been activated by pulling the conveyor
activation lever toward you, but the conveyor belt is not turning even though the tension rod has
been adjusted properly and the conveyor drive roller is turning.
Solution: Adjust the tension bolts of the conveyor belt system on each side, 1/2 turn at a time on both sides
equally, to increase the tension on the conveyor belt. Do as follows:
1. Loosen the 2 vertical (yellow)
nuts on each side of the machine.
2. Loosen the (yellow) jam nut and
tighten the horizontal bolt to push
the conveyor belt roller forward a
1/2 turn at a time.
3. Now tighten down the two vertical
nuts on both sides to hold the front
system in place and tighten the jam
nuts to lock the tension bolts.
4. Test the machine and re-adjust if
necessary.
